# Apis Cor

Prints concrete walls of homes on site with its own robots and sells the systems to builders, from Melbourne, Florida.

- **Operating status:** Active. Its site was live in November 2026 offering construction robots, homes and training; the latest project found is a Habitat for Humanity home in Melbourne, Florida, built with its technology and dedicated in June 2026. [3][4]
- **Momentum:** Unknown
- **Ownership:** Independent
- **Headquarters:** Melbourne, Florida, United States
- **Founded:** 2016
- **Role:** Builder, Supplier
- **Method:** 3D printed
- **Material:** Concrete
- **Builds:** Single-family, Affordable housing
- **Website:** https://apis-cor.com/ (loaded when checked)

Checked 2026-11-20. Page: https://nowcitylabs.com/fieldguide/construction/p/apis-cor/

## Summary by the Lead Analyst

Apis Cor builds and sells robots that print the concrete walls of a house on site and builds homes with them in Brevard County, Florida. Public radio reported in December 2024 a four-bedroom model home listed for sale and Habitat for Humanity homes under way for households at 30 to 50 percent of area median income; one was dedicated in June 2026. Its site cites a printed building in Dubai. No count of homes delivered, funding amount or headcount was found.

Verify first: Only a handful of Florida homes are documented; ask how many homes and robots are in service.

## What it is

Apis Cor was founded in 2016 by Nick and Anna Cheniuntai and is based in Melbourne, Florida. It develops construction printing robots and materials; its two robots, Frank and Gary, print concrete walls on the building site. The company site offers the robots to builders, homes and accessory units, short-term stays in its homes, printed architectural elements and training. [1][3]
In December 2023 it began a 2,168 square foot, four-bedroom printed house in Melbourne as a workforce housing model, projecting construction costs 38 percent below Brevard rates. WLRN reported in December 2024 that the house, after serving as a model home, was listed for sale. [1][2]
With Space Coast Habitat for Humanity and Macedonia Community Development Corporation it was printing Habitat homes in Melbourne in December 2024; WLRN reported that two homes, when finished, would be leased at costs set for households earning at or below 30 to 50 percent of area median income. Its director of construction said a print takes about 32 hours with two operators. [2]

## Key facts

- Founded: 2016 [1]
- Headquarters: Melbourne, Florida [1][3]
- Homes delivered: Model home, 2024; Habitat home dedicated, 2026 [1][2][4]
- Serves: Florida; a printed building in Dubai [1][3]
- Ownership: Backed by Alchemist Accelerator, At One Ventures [1]

## Production and technology

- Production: Mobile or field factory, Robots print concrete structures on the job site [2][3]
- Technology: Robotics, Its robots Frank and Gary print concrete walls on site [1][2]

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: 3D printed
- Materials: Concrete
- Products: No data
- Building markets: Single-family, Affordable housing
- Factory: No data
- Markets served: Florida, United Arab Emirates
- Demonstrated scale: No data
- Annual capacity: No data
- Cost: Not published
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Partial · Checked Nov 2026

## Serves

- Florida (US-FL) [1][2]
- United Arab Emirates (AE) [3]

## Timeline

- 2016 (founded): Founded by Nick and Anna Cheniuntai. [1]
- 2023-12-05 (milestone): Began a 2,168 square foot printed workforce housing model house in Melbourne, Florida. [1]
- 2024-12 (milestone): Held a wall raising for Habitat for Humanity homes in Melbourne, to be leased to lower-income households; its model home was listed for sale. [2]
- 2026-06 (milestone): Space Coast Habitat for Humanity dedicated its first printed home, built with Apis Cor technology, beside a Macedonia CDC partnership home in Melbourne. [4]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: No public evidence (level 0)

No figure on print waste, material sourcing or reuse was found in the sources read.

- Gap: Material use and waste per printed home.

### Energy and Carbon: Claims only (level 1)

The Habitat director expects lower utility bills from concrete walls; no measured energy or carbon figure was found.

- Evidence: WLRN quotes a claim that utility bills could fall by half. [2]
- Gap: Measured energy use or an energy rating for its printed homes.

### Cost and Access: Third-party evidence (level 3)

Public radio reported in December 2024 two Habitat homes under way in Melbourne, to be leased at costs set for households at or below 30 to 50 percent of area median income, with keys due to a family at completion. Its cost claim of 38 percent below local rates is unverified.

- Evidence: WLRN reported the two Habitat homes and their income targets. [2]
- Evidence: The 2023 release projects construction costs 38 percent below Brevard rates. [1]
- Gap: Sale or rent prices of its homes and any verified cost comparison.

### Workforce: Claims only (level 1)

Its director of construction cites a labor shortage of over 40,000 open positions and says two operators run a print. No headcount or training figure was found.

- Evidence: WLRN reports two operators and about 32 hours per print, as stated by the company. [2]
- Gap: Employees, training and site safety record.

### Delivery Record: Third-party evidence (level 3)

Public radio documents a finished model home listed for sale in December 2024, and the Florida Chamber reported in June 2026 the dedication of a Habitat home built with its technology in Melbourne. No total of homes or robots delivered was found.

- Evidence: WLRN reported the model home listing and the Habitat homes in progress. [2]
- Evidence: The Florida Chamber of Commerce reported the Habitat home dedication. [4]
- Gap: Total homes printed and robots sold, and any funding amount.

## Sources

1. [Apis Cor to Build a 3D-Printed Model House to Demonstrate Workforce Housing in South Florida](https://prnewswire.com/news-releases/apis-cor-to-build-a-3d-printed-model-house-to-demonstrate-workforce-housing-in-south-florida-302006264.html) (Apis Cor via PR Newswire)
2. [3-D printed affordable homes debut in the Space Coast](https://www.wlrn.org/development/2024-12-11/3-d-printed-affordable-homes-debut-in-the-space-coast) (WLRN, Central Florida Public Media)
3. [Apis Cor: Robotic Construction Technology](https://apis-cor.com/) (Apis Cor)
4. [Space Coast Habitat for Humanity to Unveil First 3d-Printed Affordable Home and Celebrate Community Partnership Milestone](https://www.flchamber.com/space-coast-habitat-for-humanity-to-unveil-first-3d-printed-affordable-home-and-celebrate-community-partnership-milestone/) (Florida Chamber of Commerce)
