# Avava Dwellings

Bay Area company that sold small flat-pack homes and backyard units built from factory-made insulated panels.

- **Operating status:** Unverified. A federal court docket shows that Avava Systems LLC filed a voluntary Chapter 7 petition on October 19, 2017, and that the case was closed on April 3, 2019. Its web address now leads to an unrelated site. No source found states whether the business continued. [4][5]
- **Momentum:** Unknown
- **Ownership:** Unknown
- **Headquarters:** Berkeley, California, United States
- **Founded:** 2010
- **Role:** Manufacturer, Designer
- **Method:** Kit of parts
- **Material:** SIPs
- **Product:** Panels, Structural kits
- **Builds:** Tiny homes, Backyard homes
- **Website:** http://www.avavadwellings.com/ (no working site of its own when checked)

Checked 2026-11-19. Page: https://nowcitylabs.com/fieldguide/construction/p/avava-dwellings/

## Summary by the Lead Analyst

Avava was a Berkeley company, founded in 2010, that sold Britespace flat-pack homes of 264 to 480 square feet made from engineered wood frames and structural insulated panels. Avava Systems LLC filed for Chapter 7 in October 2017 and the case closed in April 2019. A 2020 profile credits it with 75 or more homes; 2016 press gave installed prices of $117,000 to $223,000. Its web address now leads to an unrelated site, and no source confirms whether the business continued.

Verify first: Check the California business registry for Avava Systems LLC before treating the company as trading.

## What it is

Avava, also known as Avava Systems, sold the Britespace line of small homes in three sizes from 264 to 480 square feet. Parts were made in a San Francisco Bay Area factory, shipped in flat boxes and assembled on site in under two months. [1][2]
The frame was engineered wood with structural insulated panels between. In 2016 the company quoted $117,000 to $223,000, including permits, delivery and installation. [1][2]
Avava Systems LLC filed a voluntary Chapter 7 petition in October 2017. A December 2020 profile by PrefabReview still described the company as a Berkeley maker of backyard units, founded in 2010, with 75 or more homes built. The outcome is not confirmed. [4][3]

## Key facts

- Founded: 2010, per PrefabReview [3]
- Headquarters: Berkeley, California [3]
- Factory: San Francisco Bay Area, per 2016 press [1]
- Homes delivered: 75 or more, per a 2020 PrefabReview profile [3]
- Price range: 2016: $117,000 to $223,000 installed [2]

## Production and technology

- Production: No data
- Technology: No data

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: Kit of parts
- Materials: SIPs
- Products: Panels, Structural kits
- Building markets: Tiny homes, Backyard homes
- Factory: No data
- Markets served: No data
- Demonstrated scale: 75 homes delivered, 2020
- Annual capacity: No data
- Cost: $117,000 to $223,000 per home, turnkey, 2016
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Partial · Checked Nov 2026

## Measured

- Units delivered: 75 homes delivered, 2020 (Prefab Review profile, 75 or more homes built) [3]
- Price: $117,000 to $223,000 per home, turnkey, 2016 [2]

## Timeline

- 2016-08 (milestone): Launched the Britespace flat-pack homes in three sizes, priced from $117,000 to $223,000. [1][2]
- 2017-10-19 (bankruptcy): Avava Systems LLC filed a voluntary Chapter 7 petition in the Northern District of California bankruptcy court. [4]
- 2020-12 (milestone): PrefabReview published a profile listing the company as a Berkeley maker of backyard units with 75 or more homes built. [3]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: No public evidence (level 0)

No public evidence on factory waste, reused materials or disassembly of the flat-pack system was found as of November 2026.

- Gap: Waste figures and any proof the flat-pack system was taken down and reused.

### Energy and Carbon: Specifics published (level 2)

Dezeen reported in August 2016 that the design used structural insulated panels, low-VOC finishes without formaldehyde and provision for rooftop solar and a battery. No measured energy use or certification of a built unit was found.

- Evidence: Dezeen reported structural insulated panels, low-VOC finishes with no formaldehyde, and a design made to take rooftop solar and a battery pack. [1]
- Gap: Measured energy use, insulation values or any certification of a built unit.

### Cost and Access: Specifics published (level 2)

Construction Dive reported 2016 prices of $117,000 to $223,000 including permits, delivery and construction. Prefab Review listed $297 to $433 or more per square foot in December 2020. No record of buyers or affordable housing use was found.

- Evidence: Construction Dive reported prices of $117,000 to $223,000 including permitting, delivery and construction. [2]
- Evidence: PrefabReview listed $297 to $433 or more per square foot in 2020. [3]
- Gap: Final installed costs paid by buyers and any affordable housing use.

### Workforce: No public evidence (level 0)

No public figure exists for the factory workforce or for what happened to workers after the October 2017 Chapter 7 filing.

- Gap: Headcount, and any account of the workforce around the bankruptcy filing.

### Delivery Record: Third-party evidence (level 3)

A federal docket shows Avava Systems LLC filed a voluntary Chapter 7 petition on October 19, 2017, closed April 3, 2019. Prefab Review credited the company with 75 or more homes in December 2020. No source confirms trading after the case closed.

- Evidence: The bankruptcy docket for Avava Systems LLC shows a voluntary Chapter 7 case filed on October 19, 2017, with a last filing in April 2019. [4]
- Evidence: PrefabReview listed 75 or more homes built as of December 2020. [3]
- Gap: What happened to the business after the bankruptcy case closed, its state registration status, and a verified list of homes.

## Sources

1. [Avava unveils tiny house that represents a completely new way to do prefab](https://www.dezeen.com/2016/08/10/avava-britespace-tiny-house-flat-pack-micro-dwelling-easy-transportation-assembly/) (Dezeen)
2. [Modular builder touts improved tiny house models using prefab methods](https://www.constructiondive.com/news/modular-builder-touts-improved-tiny-house-models-using-prefab-methods/424362/) (Construction Dive)
3. [AVAVA Review](https://www.prefabreview.com/blog/avava-review) (PrefabReview)
4. [Avava Systems LLC, case 17-42629 (Bankr. N.D. Cal.), docket](https://www.courtlistener.com/docket/6282056/avava-systems-llc/) (CourtListener (Free Law Project))
5. [Former company web address (now forwards to an unrelated site)](http://www.avavadwellings.com/) (avavadwellings.com)
