# BotBuilt

Makes wall panels and trusses for homebuilders with industrial robot arms in its own plants, from Durham, North Carolina.

- **Operating status:** Active. The company site was live with a 2026 copyright when read in November 2026; its newest listed news item is from May 2025, and no later funding or plant was found. [4][5]
- **Momentum:** Unknown
- **Ownership:** Independent
- **Headquarters:** Durham, North Carolina, United States
- **Founded:** 2020
- **Role:** Manufacturer, Software
- **Method:** Panels
- **Product:** Panels, Components
- **Builds:** Single-family, Multifamily
- **Website:** https://www.botbuilt.com/ (loaded when checked)

Checked 2026-11-20. Page: https://nowcitylabs.com/fieldguide/construction/p/botbuilt/

## Summary by the Lead Analyst

BotBuilt runs robot cells that frame wall panels and trusses for homebuilders, selling the framing rather than the machines. It raised a $12.4 million seed round in December 2023, when press reported nine homes built with its parts and its CTO cited ten builders with more than 2,000 units in its pipeline. Its plant locations, output since 2023 and any measured cost or waste result are not in the sources read.

Verify first: Output figures stop at nine homes in late 2023; ask for current panel volume and which plant would supply a given job.

## What it is

BotBuilt was founded in Durham, North Carolina in late 2020 by Brent Wadas (CEO), Barrett Ames (CTO) and Colin Devine (COO). Its software reads a two-dimensional house plan, builds a 3D framing model and turns it into a list of panels, then programs the robots, so a new design does not need manual reprogramming. [1][3]
Pro Builder describes two industrial robots on rails, adapted with BotBuilt tooling, building wall panels, roof trusses and sheathing. The company sells framing components under service contracts with builders rather than selling its system. Its CTO referred to its first two factories without naming their locations. [1][3]
In December 2023 it raised a $12.4 million seed round at a reported $35 million valuation. TechCrunch reported nine homes built with its components and about $75,000 in revenue; its CTO said ten builders had more than 2,000 homes and apartment units in its pipeline. [1][2]

## Key facts

- Founded: 2020, Durham, North Carolina [1][3]
- Headquarters: Durham, North Carolina [1]
- Homes delivered: 9 homes with its framing, December 2023 [1][2]
- Funding raised: $12.4 million seed, December 2023 [1][2]
- Employees: 13, planned to grow to about 20 (2023) [1]
- Ownership: Venture-backed [1][2]

## Production and technology

- Production: No data
- Technology: Robotics, Two rail-mounted industrial robots build wall panels and trusses [1][3]

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: Panels
- Materials: No data
- Products: Panels, Components
- Building markets: Single-family, Multifamily
- Factory: Not published
- Markets served: No data
- Demonstrated scale: 9 homes delivered, 2023
- Annual capacity: No data
- Cost: Not published
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Partial · Checked Nov 2026

## Measured

- Units delivered: 9 homes delivered, 2023 (TechCrunch: homes built with its framing since launch, not homes it built) [1]

## Timeline

- 2020 (founded): Founded in Durham, North Carolina by Brent Wadas, Barrett Ames and Colin Devine. [1][3]
- 2023-12 (funding): Raised a $12.4 million seed round at a reported $35 million post-money valuation. TechCrunch names Ambassador Supply, Y Combinator, Owens Corning and Shadow Ventures as earlier investors; the round's participants were not named. [1][2]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: No public evidence (level 0)

No waste figure, material source or reuse statement was found. Sources describe manual site framing as wasteful but publish no measure for BotBuilt's own plants.

- Gap: Lumber waste per home framed on its lines.

### Energy and Carbon: No public evidence (level 0)

No energy or embodied carbon figure was found in the sources read.

- Gap: Any energy or carbon data for its plants or the homes they frame.

### Cost and Access: Specifics published (level 2)

TechCrunch reports about $15,000 in revenue per house of wall panels in 2023, set against an industry framing cost of $7 to $16 per square foot. No published price list or affordable project was found.

- Evidence: TechCrunch reported about $15,000 in revenue per house of wall panels, as stated by its CTO. [1]
- Gap: Published prices and any affordable homes framed with its parts.

### Workforce: Specifics published (level 2)

TechCrunch reported 13 staff growing to about 20 in December 2023. No figure on plant jobs, training or safety was found.

- Evidence: TechCrunch reported a team of 13 planned to grow to about 20. [1]
- Gap: Current headcount, plant jobs and safety record.

### Delivery Record: Third-party evidence (level 3)

Named press reports nine homes built with its framing and a $12.4 million seed round in December 2023. No later output figure was found.

- Evidence: TechCrunch and SiliconANGLE reported the December 2023 seed round and nine homes. [1][2]
- Gap: Homes or panels produced since 2023 and plant locations.

## Sources

1. [BotBuilt wants to lower the cost of homebuilding with robots](https://techcrunch.com/2023/12/27/botbuilt-wants-to-lower-the-cost-of-homebuilding-with-robots) (TechCrunch)
2. [Robotic homebuilding startup BotBuilt raises $12.4M](https://siliconangle.com/2023/12/27/robotic-homebuilding-startup-botbuilt-raises-12-4m) (SiliconANGLE)
3. [Q+A With Brent Wadas: How BotBuilt Is Automating Home Construction](https://www.probuilder.com/building-better/article/55198608/qa-with-brent-wadas-how-botbuilt-is-automating-home-construction) (Pro Builder)
4. [BotBuilt](https://www.botbuilt.com/) (BotBuilt)
5. [News](https://www.botbuilt.com/news) (BotBuilt)
