# Diamond Age

Printed concrete walls and finished homes on site with a robotic gantry in Arizona; ceased operations in December 2024.

- **Operating status:** Closed in 2024. HousingWire reported on January 22, 2025 that the founders confirmed on December 12, 2024 that the company had ceased operations and was entering bankruptcy. Its web address showed a parked-domain page when checked in November 2026. [1][6]
- **Momentum:** Unknown
- **Ownership:** Independent
- **Headquarters:** Phoenix, Arizona, United States
- **Role:** Builder
- **Method:** 3D printed
- **Material:** Concrete, Light-gauge steel
- **Builds:** Single-family
- **Website:** https://www.diamondage3d.com/ (no working site of its own when checked)

Checked 2026-11-20. Page: https://nowcitylabs.com/fieldguide/construction/p/diamond-age/

## Summary by the Lead Analyst

Diamond Age set up a robotic gantry on the building site to print concrete walls and do finishing tasks, sold as a service to builders. It raised a $50 million Series A in 2022 and printed 30 homes from 2022 to early 2024, mostly at Century Complete's Mountain View Estates in Casa Grande, Arizona. The founders confirmed in December 2024 that it had ceased operations and was entering bankruptcy after it could not raise more capital.

Verify first: The company is closed and its equipment was put up for auction; the sources read do not say who finished its last homes in Casa Grande.

## What it is

Diamond Age was a Phoenix construction robotics company. Its system, which it called Factory in the Field, moved print heads and robotic tools along a gantry over the house to print insulated concrete composite walls and handle other building tasks on site. It sold this as robotics as a service to production builders and claimed up to 55 percent less manual labor and build times as short as 30 days. [2][3][4]
Co-founder and CEO Jack Oslan announced a $50 million Series A led by Prime Movers Lab in March 2022. Its first community, with Century Complete at Mountain View Estates in Casa Grande, went on sale in January 2023 with single-story plans up to 1,901 square feet starting in the upper $200,000s. [2][3][4]
HousingWire reported that it printed 30 homes between 2022 and early 2024, including two hybrids with printed exterior walls and light-gauge steel interiors, and was still building the last 15 homes at Mountain View Estates in late 2024. In March 2024 it moved its four gantries back to Phoenix and by July had retooled its factory to make light-gauge steel wall panels. The founders confirmed on December 12, 2024 that it had ceased operations and was entering bankruptcy, and HousingWire reported its equipment up for auction through Silicon Valley Disposition. [1]

## Key facts

- Headquarters: Phoenix, Arizona [1][4]
- Homes delivered: 30 homes printed, 2022 to early 2024 [1]
- Funding raised: $50 million Series A, March 2022 [2]
- Price range: From the upper $200,000s, Casa Grande, 2023 [3]
- Serves: Casa Grande, Arizona [1][3]

## Production and technology

- Production: Mobile or field factory, Factory in the Field: a robotic gantry set up on the building site [2][3]
- Technology: Robotics, Gantry with robotic arms printed concrete walls on the building site [2][4]

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: 3D printed
- Materials: Concrete, Light-gauge steel
- Products: No data
- Building markets: Single-family
- Factory: No data
- Markets served: Arizona
- Demonstrated scale: 30 homes delivered, 2024
- Annual capacity: No data
- Cost: Not published
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Partial · Checked Nov 2026

## Measured

- Units delivered: 30 homes delivered, 2024 (HousingWire: homes 3D-printed from 2022 to early 2024, two of them hybrids) [1]

## Serves

- Arizona (US-AZ) [1][3]

## Timeline

- 2022-03 (funding): Raised a $50 million Series A led by Prime Movers Lab; production builders and land developers made up 20 percent of the round. [2]
- 2023-01-18 (milestone): Its first community of printed homes, Mountain View Estates in Casa Grande with Century Complete, went on sale. [3][4]
- 2024-03 (milestone): Took down its field printing operation, moved its four gantries back to Phoenix and retooled its factory to make light-gauge steel wall panels by July. [1]
- 2024-12-12 (closure): The founders confirmed the company had ceased operations and was entering bankruptcy. [1]

## What public reporting says happened

- Co-founder Jack Oslan told HousingWire that venture investors stopped extending Series A funding and waited for Series B metrics the company could not reach without more resources. [1]
- HousingWire reports that rate rises in 2022 and 2023 and the early 2023 Silicon Valley Bank collapse cooled venture funding, and that its pivot to light-gauge steel came too late. [1]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: Specifics published (level 2)

The company stated in 2023 that its system cut construction waste from the high teens to low single digits in percent. No third party measured it, and no figure on reuse or disassembly was found.

- Evidence: The January 2023 release claims construction waste falls from the high teens to low single digits. [3]
- Gap: A measured waste figure from Mountain View Estates.

### Energy and Carbon: No public evidence (level 0)

No energy rating or embodied carbon figure for its printed homes was found in the sources read.

- Gap: Energy ratings or carbon data for the 30 homes.

### Cost and Access: Specifics published (level 2)

The 2023 release, repeated by trade press, lists homes sold by Century Complete from the upper $200,000s. No closed sale prices and no affordable or subsidized homes were found.

- Evidence: The release and 3DPrint.com report plans up to 1,901 square feet from the upper $200,000s. [3][4]
- Gap: Final sale prices and buyer income levels.

### Workforce: No public evidence (level 0)

No headcount, training or layoff figure was found, including at the December 2024 shutdown.

- Gap: How many people it employed and what happened to them at closure.

### Delivery Record: Third-party evidence (level 3)

HousingWire documents 30 homes printed from 2022 to early 2024, a $50 million Series A in 2022 and closure in December 2024.

- Evidence: HousingWire reported 30 homes printed and the December 2024 shutdown. [1]
- Evidence: AZ Big Media reported the $50 million Series A. [2]
- Gap: Whether the last homes at Mountain View Estates were finished and by whom.

## Sources

1. [Diamond Age shuts down after hard battle for new investment](https://www.housingwire.com/articles/diamond-age-shuts-down-after-hard-battle-for-new-investment/) (HousingWire)
2. [Diamond Age raises $50M to advance robotic home construction](https://azbigmedia.com/business/diamond-age-raises-50m-to-advance-robotic-home-construction/) (AZ Big Media)
3. [Diamond Age's First Community of 3D-Printed Homes Goes on Sale](https://www.citybiz.co/article/370622/diamond-ages-first-community-of-3d-printed-homes-goes-on-sale/) (citybiz)
4. [Leading US Homebuilder Century Communities Starts Selling 3D Printed Homes in Arizona](https://3dprint.com/296880/leading-us-homebuilder-century-communities-starts-selling-3d-printed-homes-in-arizona/) (3DPrint.com)
5. [A Look Inside the Future of Housing: 3D Printed Homes by Diamond Age](https://3dprint.com/300951/a-look-inside-the-future-of-housing-3d-printed-homes-by-diamond-age/) (3DPrint.com)
6. [Diamond Age](https://www.diamondage3d.com/) (Diamond Age)
