# Howick

Makes computer-controlled machines that roll-form steel coil into wall, floor and truss framing for builders and modular plants.

- **Operating status:** Active. Its site was live in November 2026 listing its FRAMA machine range and describing the business as family owned and led by Nick and Hamish Coubray. [1][2]
- **Momentum:** Unknown
- **Ownership:** Independent
- **Headquarters:** Auckland, New Zealand
- **Founded:** 1978
- **Role:** Supplier, Software
- **Method:** Panels
- **Material:** Light-gauge steel
- **Builds:** Single-family, Workforce housing, Affordable housing
- **Website:** https://www.howickltd.com/ (loaded when checked)

Checked 2026-11-20. Page: https://nowcitylabs.com/fieldguide/construction/p/howick/

## Summary by the Lead Analyst

Howick, a family-owned firm in Auckland, makes computer-controlled machines that roll-form light gauge steel into framing for walls, floors and trusses, sold to builders and offsite plants, including volumetric module makers. It says its machines work in more than 80 countries; a 2023 profile reports 53 staff and 95 percent of sales offshore. No count of machines installed or homes framed with them was found.

Verify first: Machine counts and housing output are not published; ask for reference plants framing homes on the model you would buy.

## What it is

Howick began in 1978 as a Coubray family engineering workshop and is led by Nick and Hamish Coubray; it describes itself as family owned. It makes the FRAMA range of light steel roll-forming machines, which take CAD data and produce cold-formed steel studs, joists and truss members cut, punched and ready to assemble, with its own panel and machine control software. [1][2]
Its site names developers, builders and offsite construction companies as customers and lists uses including residential new builds, bathroom pods, volumetric modules, a low-cost housing system and worker accommodation. It also offers a mobile factory product. The company says its machines work in more than 80 countries. [1][2]
A September 2023 Technology Investment Network profile lists the Auckland firm, led by CEO Nick Coubray, with 53 employees and 95 percent of sales offshore, with the UK a major market. In 2016 NTA certified the studs, joists and tracks it makes, from 12 to 22 gauge, against US building codes. [3][4]

## Key facts

- Founded: 1978, as a family engineering workshop [2]
- Headquarters: Auckland, New Zealand [3]
- Employees: 53, per a 2023 profile [3]
- Serves: More than 80 countries (company); UK a major market [2][3]
- Ownership: Family owned [2]

## Production and technology

- Production: No data
- Technology: Automated production, CAD-driven roll-formers cut, punch and label framing parts ready to assemble [1]

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: Panels
- Materials: Light-gauge steel
- Products: No data
- Building markets: Single-family, Workforce housing, Affordable housing
- Factory: No data
- Markets served: United Kingdom, United States, Australia, New Zealand
- Demonstrated scale: No data
- Annual capacity: No data
- Cost: Not published
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Partial · Checked Nov 2026

## Serves

- United Kingdom (GB) [3]
- United States (US) [4]
- Australia (AU) [2]
- New Zealand (NZ) [2]

## Timeline

- 1978 (founded): Founded as a Coubray family general engineering workshop. [2]
- 2016-11-18 (milestone): NTA certified its cold-formed steel studs, joists and tracks against US building codes. [4]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: No public evidence (level 0)

No figure on steel scrap, recycled content or disassembly of framing made on its machines was found.

- Gap: Coil yield and scrap rates on its machines.

### Energy and Carbon: No public evidence (level 0)

No energy or carbon figure for its machines or the framing they make was found.

- Gap: Embodied carbon of framing per home and machine energy use.

### Cost and Access: Claims only (level 1)

The company lists a low-cost housing system among uses for its machines; no machine price or cost per home was found.

- Evidence: The company site lists a low-cost housing system among its applications. [1]
- Gap: Machine prices and cost per home framed.

### Workforce: Specifics published (level 2)

A 2023 industry profile reports 53 employees and apprenticeships for machine fitters, turners and CNC operators. Its US project manager told NTA its machines help less-skilled workers. No training count or safety figure was found.

- Evidence: The Technology Investment Network profile lists 53 employees and its apprenticeships. [3]
- Gap: Training and safety records for crews using its machines.

### Delivery Record: Specifics published (level 2)

The company reports machines in more than 80 countries and operation since 1978; a 2016 US code certification is on record. No count of machines installed or homes framed was found.

- Evidence: NTA certified its steel framing products in 2016. [4]
- Evidence: The company says its machines work in more than 80 countries. [2]
- Gap: Machines installed by year and named housing projects.

## Sources

1. [Howick](https://www.howickltd.com/) (Howick Ltd)
2. [About Howick](https://www.howickltd.com/about-howick) (Howick Ltd)
3. [TIN Member Profile: Howick](https://tin100.com/tin-member-profile-howick/) (Technology Investment Network)
4. [Howick, Ltd. Receives NTA Certification for Cold-Formed Steel Framing in the United States](https://www.icc-nta.org/newsmedia/press-release/howick-certification-steel-framing/) (NTA, Inc.)
