# Stillwater Dwellings

Designs high-end modern homes built from factory-made wall panels that a local contractor assembles on site.

- **Operating status:** Active. Site is live and lists offices in Seattle, Boston and San Diego. It held construction-stage open houses at two homes in Malibu and Pacific Palisades on July 18, 2026. [1][8]
- **Momentum:** Unknown
- **Ownership:** Unknown
- **Headquarters:** Seattle, Washington, United States
- **Founded:** 2008
- **Role:** Designer
- **Method:** Panels
- **Material:** Light wood frame
- **Product:** Panels
- **Builds:** Single-family
- **Website:** https://www.stillwaterdwellings.com/ (loaded when checked)

Checked 2026-11-19. Page: https://nowcitylabs.com/fieldguide/construction/p/stillwater-dwellings/

## Summary by the Lead Analyst

Stillwater Dwellings is a Seattle architecture firm, founded in 2008, that sells custom modern homes built from factory-made engineered wood wall panels and assembled by the buyer's contractor. It publishes total project cost of $600 to $800 per square foot. A 2023 review listing counts 25 or more homes; two were under construction in Malibu and Pacific Palisades in July 2026. The panel plant, its owner, a current home count and ownership are not public.

Verify first: Ask where the panels are made and by whom; the company does not identify the plant.

## What it is

Stillwater Dwellings is an architecture-led prefab company. It sells custom and pre-designed homes in three series and supplies the design, engineering and a package of prefabricated components. [1]
The company says wall sections, pre-cut framing and hardware are made in a climate-controlled factory, shipped flat by truck and assembled by the buyer's general contractor, who also does the site work, foundation and interior finishes. Its sustainability page says the panels use engineered wood. It does not publish where the panels are made or who owns the plant. [5][3]
A 2023 review by Prefab Review put the count at more than 25 homes, most of them on the West Coast. [7]

## Key facts

- Founded: 2008 [2]
- Headquarters: Seattle, Washington [7]
- Homes delivered: 25+ (Prefab Review, 2023) [7]
- Price range: $600 to $800 per sq ft total project, excl. landscaping [4]
- Serves: North America per company; offices in WA, MA, CA [5]

## Production and technology

- Production: No data
- Technology: No data

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: Panels
- Materials: Light wood frame
- Products: Panels
- Building markets: Single-family
- Factory: N/A, design firm
- Markets served: United States
- Demonstrated scale: 25 homes delivered, 2023
- Annual capacity: No data
- Cost: $600 to $800 per sq ft, turnkey, 2026
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Strong · Checked Nov 2026

## Measured

- Units delivered: 25 homes delivered, 2023 (Prefab Review count of homes built; stated as 25+) [7]
- Price: $600 to $800 per sq ft, turnkey, 2026 [4]

## Serves

- United States (US) [7]

## Timeline

- 2008 (founded): Founded by residential architect Matthew Stannard, according to a company press release that describes the company as based in Seattle. [6]
- 2018-12 (milestone): Marked ten years in business, with Kaveh Khatibloo and John Morgan named as co-chief executives. [6]
- 2023-11 (milestone): Prefab Review listed more than 25 homes built and a price of $350 to $500 per square foot. [7]
- 2026-07-18 (milestone): Held construction-stage open houses at two homes under construction in Malibu and Pacific Palisades. [8]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: Specifics published (level 2)

Company statements give figures: panel production cuts material waste by up to 50 percent and site deliveries by up to 90 percent against stick building, and FSC-certified floors are an option. No waste audit, offcut destination or disassembly information was found.

- Evidence: The sustainability page says prefabrication cuts material waste by up to 50 percent and site deliveries by up to 90 percent. [3]
- Evidence: Lists FSC-certified hardwood floors and countertops made from recycled glass and porcelain as available options. [3]
- Gap: A waste audit, an account of where factory offcuts go, and anything on disassembly or reuse.

### Energy and Carbon: Specifics published (level 2)

The company publishes minimum insulation values of R-50 roof, R-28 walls and R-30 floors and says homes are solar ready. It says panelized production could cut energy use 15 to 20 percent. No home has a published energy rating, certification or embodied carbon figure.

- Evidence: Publishes minimum insulation values of R-50 roof, R-28 walls and R-30 floors. [3]
- Evidence: Says homes are ready for solar panels and electric vehicle chargers and that panelized production could potentially cut energy use 15 to 20 percent. [3]
- Gap: Certified homes, measured energy use, embodied carbon numbers, and any third-party check of the 15 to 20 percent figure.

### Cost and Access: Specifics published (level 2)

The company publishes total project cost of $600 to $800 per square foot, excluding landscaping, with the component package at $275 to $375. A November 2023 review gave $350 to $500. No affordable, workforce or supportive homes were found.

- Evidence: Signature Series total project cost is listed at $600 to $800 per square foot, with the home and component package at $275 to $375. [4]
- Evidence: Prefab Review listed $350 to $500 per square foot in November 2023. [7]
- Gap: Final costs of completed homes, and prices for the wildfire rebuild projects shown on its site.

### Workforce: Claims only (level 1)

The about page names more than 30 staff, mostly architects, drafters and project managers. The panel plant is not identified, and nothing is published on the people who make the panels, their pay, training or safety.

- Evidence: The about page lists more than 30 staff by name and role across design, production and project management. [2]
- Gap: Factory headcount, wages, training or safety record, and the identity of the panel plant.

### Delivery Record: Specifics published (level 2)

Founded in 2008 per a December 2018 company release, and holding open houses at two homes under construction in July 2026. The only home count found is 25 or more, from a November 2023 review listing; the company publishes no total and no dated project list.

- Evidence: A company press release marked ten years in business in December 2018. [6]
- Evidence: Prefab Review listed more than 25 homes built as of November 2023. [7]
- Evidence: The company listed open houses at two homes under construction on July 18, 2026. [8]
- Gap: A current count of completed homes, a list of projects with dates, and public information on ownership or funding.

## Sources

1. [Stillwater Dwellings home page](https://www.stillwaterdwellings.com/) (Stillwater Dwellings)
2. [About Us](https://www.stillwaterdwellings.com/about-us/) (Stillwater Dwellings)
3. [Sustainability](https://www.stillwaterdwellings.com/sustainability/) (Stillwater Dwellings)
4. [Signature Series Pricing](https://www.stillwaterdwellings.com/signature-series-pricing/) (Stillwater Dwellings)
5. [FAQs](https://www.stillwaterdwellings.com/faqs/) (Stillwater Dwellings)
6. [Stillwater Dwellings Celebrates 10 Years (archived 2022-03-11)](https://web.archive.org/web/20220311075327/https://www.prweb.com/releases/stillwater_dwellings_celebrates_10_years/prweb15963720.htm) (PRWeb)
7. [Stillwater Dwellings Review](https://www.prefabreview.com/blog/stillwater-dwellings-review) (Prefab Review)
8. [Stillwater Prefab Construction Open Houses: Pacific Palisades and Malibu](https://www.stillwaterdwellings.com/event/stillwater-prefab-construction-open-houses-pacific-palisades-malibu/) (Stillwater Dwellings)
