# Vantem

Makes modular buildings with a proprietary insulated panel at two acquired Southeastern US plants; plans partner plants.

- **Operating status:** Active. Backed by TEM Capital and Breakthrough Energy Ventures. Bought Arris Manufacturing of Clio, South Carolina in January 2025, and its site lists two Southeastern factories. [5][1]
- **Momentum:** Expanding
- **Ownership:** Independent
- **Headquarters:** Durham, North Carolina, United States
- **Role:** Manufacturer
- **Method:** Volumetric modules
- **Material:** Other
- **Product:** Room modules
- **Builds:** Single-family, Multifamily
- **Website:** https://vantem.com/ (loaded when checked)

Checked 2026-11-20. Page: https://nowcitylabs.com/fieldguide/construction/p/vantem/

## Summary by the Lead Analyst

Vantem makes modular buildings from a proprietary insulated panel and plans a network of smaller, lower-cost regional factories run with local developers. It bought Affinity Building Systems in Georgia in 2023 and Arris Manufacturing in South Carolina in 2025, and raised a $10 million Series A led by Breakthrough Energy Ventures in 2022. Not public: homes delivered, panel materials, prices, staff numbers and any new factory beyond the two acquired.

Verify first: Ask how many of the planned 15 to 20 regional factories exist beyond the two acquired plants, and the count of homes shipped.

## What it is

Vantem builds modular units around a proprietary panel with an insulating layer between two structural boards; Pro Builder reported in 2022 that about 80 percent of the work is done before a unit leaves the factory. It was set up by the private equity group TEM Capital, began in South America and the Caribbean, and moved to the United States. [3][4]
Its stated plan is 15 to 20 regional factories, each smaller and cheaper than a typical plant at about $20 million, set up as joint ventures in which Vantem supplies the plant and a local developer supplies the projects, with output tailored to the region. So far it has grown by buying plants: Affinity Building Systems in Lakeland, Georgia, in 2023 and Arris Manufacturing, a multifamily maker in Clio, South Carolina, in 2025. [4][5][1]

## Key facts

- Headquarters: Durham, North Carolina [1]
- Factory: Lakeland, Georgia and Clio, South Carolina [1]
- Funding raised: $10 million Series A, November 2022 [4]
- Ownership: Backed by TEM Capital and Breakthrough Energy Ventures [2]

## Production and technology

- Production: No data
- Technology: No data

## Card fields

The same twelve fields every card, table row and comparison shows. A missing value says why: No data, Not published, N/A or Not yet rated.

- Method: Volumetric modules
- Materials: Other
- Products: Room modules
- Building markets: Single-family, Multifamily
- Factory: Lakeland, GA; Clio, SC
- Markets served: No data
- Demonstrated scale: Not published
- Annual capacity: 1,000,000 sq ft a year, reported 2023
- Cost: Not published
- Green: Not yet rated
- Value: Not yet rated
- Evidence: Thin · Checked Nov 2026

## Measured

- Capacity per year: 1,000,000 sq ft/yr capacity, reported 2023 (company-stated annual capacity of one planned regional factory) [4]

## Factories

- Lakeland, Georgia, United States: Affinity Modular, acquired May 2023 [1][4]
- Clio, South Carolina, United States: Former Arris Manufacturing, acquired January 2025 [1][5]

## Timeline

- 2022-07 (milestone): Pro Builder reported plans for 15 U.S. factories over seven years and a Series A from Breakthrough Energy Ventures. [3]
- 2022-11 (funding): Closed a $10 million Series A led by Breakthrough Energy Ventures, HousingWire reported. [4]
- 2023-05 (acquisition): Bought Affinity Building Systems of Lakeland, Georgia, its first U.S. factory. [4]
- 2025-01 (acquisition): Bought Arris Manufacturing of Clio, South Carolina, adding multifamily modular production. [5]

## Findings by five AI specialists

A level is the strength of the public evidence for one specialist, on a scale of 0 to 4. It is not a grade of the company, and there is no total.

### Materials and Circularity: No public evidence (level 0)

No factory waste figure, material source or design for disassembly was found for Vantem's panel or modules as of November 2026.

- Gap: Panel materials, factory scrap rates and whether modules can be taken apart.

### Energy and Carbon: Claims only (level 1)

HousingWire reported company claims in 2023 and 2025 of homes up to 70 percent more energy efficient at no added cost, and a plan for multifamily homes to meet DOE Zero Energy Ready Home standards. No certified home, energy test or embodied carbon figure was found.

- Evidence: HousingWire reported in January 2025 that the company says its homes are up to 70 percent more energy efficient and its multifamily homes are to meet DOE Zero Energy Ready Home standards. [5]
- Gap: Zero Energy Ready Home certificates, measured energy use and embodied carbon of the panel.

### Cost and Access: Claims only (level 1)

Pro Builder reported in July 2022 the chief executive's claim that units cost about 20 percent less than standard construction. No price per home or square foot and no affordable homes delivered are published.

- Evidence: Pro Builder reported a claim of about 20 percent lower cost than standard construction and 30 percent lower than typical net-zero construction. [3]
- Gap: Published prices and any homes sold or rented to lower income households.

### Workforce: No public evidence (level 0)

No headcount, wage, training or safety figure was found for Vantem or its two plants as of November 2026.

- Gap: Workers at Lakeland and Clio, wages, training and safety records.

### Delivery Record: Specifics published (level 2)

HousingWire confirmed a $10 million Series A in November 2022 and the purchases of Affinity in 2023 and Arris in 2025; the company site lists both plants. No count of homes or modules Vantem has delivered is public, and no new joint venture factory is documented.

- Evidence: HousingWire reported the $10 million Series A and the May 2023 purchase of Affinity Building Systems. [4]
- Evidence: HousingWire reported the January 2025 purchase of Arris Manufacturing. [5]
- Evidence: The company site lists two operating factories, in Georgia and South Carolina. [1]
- Gap: Homes or modules delivered under the Vantem name and any joint venture factory opened.

## Sources

1. [Locations](https://vantem.com/locations/) (Vantem)
2. [About us](https://vantem.com/about-us/) (Vantem)
3. [This Bill Gates-Funded Startup Is Building Net-Zero Prefabricated Housing](https://www.probuilder.com/building-better/off-site-construction/prefab-panelized/article/55219650/this-bill-gates-funded-startup-is-building-net-zero-prefabricated-housing) (Pro Builder)
4. [Trailblazers '23: Vantem's CapEx Light Plan To Scale Modular Fast](https://www.housingwire.com/articles/trailblazers-23-vantems-capex-light-plan-to-scale-modular-fast/) (HousingWire (The Builder's Daily))
5. [Offsite Manufacturing Pivots To Adaptation: Vantem Bets On Arris](https://www.housingwire.com/articles/offsite-manufacturing-pivots-to-adaptation-vantem-bets-on-arris/) (HousingWire (The Builder's Daily))
