Where it standsSite is live and lists offices in Seattle, Boston and San Diego. It held construction-stage open houses at two homes in Malibu and Pacific Palisades on July 18, 2026.[1][8]
Stillwater Dwellings is a Seattle architecture firm, founded in 2008, that sells custom modern homes built from factory-made engineered wood wall panels and assembled by the buyer's contractor. It publishes total project cost of $600 to $800 per square foot. A 2023 review listing counts 25 or more homes; two were under construction in Malibu and Pacific Palisades in July 2026. The panel plant, its owner, a current home count and ownership are not public.
Verify first. Ask where the panels are made and by whom; the company does not identify the plant.
What it is
Stillwater Dwellings is an architecture-led prefab company. It sells custom and pre-designed homes in three series and supplies the design, engineering and a package of prefabricated components.[1]
The company says wall sections, pre-cut framing and hardware are made in a climate-controlled factory, shipped flat by truck and assembled by the buyer's general contractor, who also does the site work, foundation and interior finishes. Its sustainability page says the panels use engineered wood. It does not publish where the panels are made or who owns the plant.[5][3]
A 2023 review by Prefab Review put the count at more than 25 homes, most of them on the West Coast.[7]
Five AI specialists each read the sourced facts on this page for one question. A level measures the public evidence; the company itself is unrated. How the AI Research Team works.
Materials and Circularity
Where do the offcuts go, and can this building be taken apart and used again?
Specifics published
Company statements give figures: panel production cuts material waste by up to 50 percent and site deliveries by up to 90 percent against stick building, and FSC-certified floors are an option. No waste audit, offcut destination or disassembly information was found.
Evidence
The sustainability page says prefabrication cuts material waste by up to 50 percent and site deliveries by up to 90 percent.[3]
Lists FSC-certified hardwood floors and countertops made from recycled glass and porcelain as available options.[3]
Gap
A waste audit, an account of where factory offcuts go, and anything on disassembly or reuse.
Energy and Carbon
What is the measured energy use or embodied carbon, and who checked it?
Specifics published
The company publishes minimum insulation values of R-50 roof, R-28 walls and R-30 floors and says homes are solar ready. It says panelized production could cut energy use 15 to 20 percent. No home has a published energy rating, certification or embodied carbon figure.
Evidence
Publishes minimum insulation values of R-50 roof, R-28 walls and R-30 floors.[3]
Says homes are ready for solar panels and electric vehicle chargers and that panelized production could potentially cut energy use 15 to 20 percent.[3]
Gap
Certified homes, measured energy use, embodied carbon numbers, and any third-party check of the 15 to 20 percent figure.
Cost and Access
What does a finished home cost, and who has moved in?
Specifics published
The company publishes total project cost of $600 to $800 per square foot, excluding landscaping, with the component package at $275 to $375. A November 2023 review gave $350 to $500. No affordable, workforce or supportive homes were found.
Evidence
Signature Series total project cost is listed at $600 to $800 per square foot, with the home and component package at $275 to $375.[4]
Prefab Review listed $350 to $500 per square foot in November 2023.[7]
Gap
Final costs of completed homes, and prices for the wildfire rebuild projects shown on its site.
Workforce
How many people work there, and what happened to them when plans changed?
Claims only
The about page names more than 30 staff, mostly architects, drafters and project managers. The panel plant is not identified, and nothing is published on the people who make the panels, their pay, training or safety.
Evidence
The about page lists more than 30 staff by name and role across design, production and project management.[2]
Gap
Factory headcount, wages, training or safety record, and the identity of the panel plant.
Delivery Record
How many buildings exist today, and is the company still here?
Specifics published
Founded in 2008 per a December 2018 company release, and holding open houses at two homes under construction in July 2026. The only home count found is 25 or more, from a November 2023 review listing; the company publishes no total and no dated project list.
Evidence
A company press release marked ten years in business in December 2018.[6]
Prefab Review listed more than 25 homes built as of November 2023.[7]
The company listed open houses at two homes under construction on July 18, 2026.[8]
Gap
A current count of completed homes, a list of projects with dates, and public information on ownership or funding.
Timeline
2008.Founded Founded by residential architect Matthew Stannard, according to a company press release that describes the company as based in Seattle.[6]
December 2018.Milestone Marked ten years in business, with Kaveh Khatibloo and John Morgan named as co-chief executives.[6]
November 2023.Milestone Prefab Review listed more than 25 homes built and a price of $350 to $500 per square foot.[7]
July 18, 2026.Milestone Held construction-stage open houses at two homes under construction in Malibu and Pacific Palisades.[8]